15
14
Operation
Cooking tips
Basics
Heating Menu
Adjust
the heat level
according to
how ingredients
are cooked.
How to set cookware
•
Place the cookware in the centre
of the cooking zone so that the
IR sensor is completely covered.
Otherwise, the IR sensor does not
operate properly.
•
For stir-frying and pan-frying,
wipe water off the top plate and
the pan both inside and out.
Otherwise, the IR sensor does
not detect the temperature of the
bottom of the pan correctly.
What is the IR sensor?
Detects the temperature of the bottom
of cookware and adjusts the heat level.
Prevents overheating, or restores the
temperature to the original level after the
temperature drops by adding ingredients.
How to turn the power on
•
Touch the main power switch
slightly long.
IR sensor
Cooking zone
Main power
switch
Heat level
1
Touch
to turn the power on.
2
Touch to start.
3
Touch to adjust
the heat level.
(P.16)
4
When cooking is complete,
Touch
to stop heating.
* This example uses
the right IH heater.
Caution
●
When preheating the pan with a
small amount of oil, do not use
high heat level.
The pan may become red-hot or
deform.
Warning
●
Stir liquids, such as soup and
stewed food, before heating.
Otherwise, liquids may splatter and
cause burns or injuries, or pot may
jump and damage the top plate.
●
Set the heat level to
or less
for preheating to prevent the pan
from overheating.
Oil temperature may rise too high,
resulting in
fi
re.
Note
• When heating for 45 minutes or
more, use the timer so that the
“Forgotten-OFF auto shutoff ” is not
activated.
To use the timer, see page 17.
Top plate
•
Default heat level:
•
Heat level range:
to
•
To lower the level rapidly:
Touch and hold.
■
To use the timer
See page 17.
Note
• The appliance automatically turns
off in about 1 minute with no
operation performed in power-on
state.
必要
な
と
き
Usage
