Panasonic KY-C227D, Руководство по эксплуатации

Страница: 15 / 16

28 29
Error Indications
必要
な
と
き
Care
Indication Probable cause
Filter clog detection
• The intake or exhaust vent is clogged with dust,
etc.
→ Remove any blockage.
or
Empty pot auto shutoff
• An empty pot has been heated.
→ Put ingredients into the pot and touch the key
again.
* This function may not operate properly depending
on the type of pot, or if the heat level is low.
• When deep-frying, oil was preheated by selecting
“Heating menu” instead of “Deep-frying menu”.
Top plate high
temperature detection
(for congee)
• “Congee menu” was used while the top plate is
hot.
• An empty pot has been heated with “Congee
menu”.
→ After the top plate cools down, touch the key
again.
Inadequate pot auto
shutoff
(for deep-frying)
• Some pots cannot be used depending on the
type, material, and shape and size of the bottom
of the pot. (P.10)
• More than 800 g of oil has been added.
Slipping pot auto
shutoff
(for deep-frying)
• The pot is not in the proper position.
• More than 800 g of oil has been added.
• Ingredients were added while preheating.
→ After dealing with the error, touch the key again
to resume preheating.
If any of the following error indications appears, check the cause and deal with it.
After the cause is eliminated, heating resumes automatically.
Indication Probable cause
Operation keys error
detection
• Water or foreign objects are attached on or around
the operation panel, or water or ingredients have
boiled over.
→ Remove them.
* If the IH heater has been turned off, perform
the key operation again.
• An operation key has been touched for 3 seconds
or more. (Except touch-and-hold operations
requiring 3 seconds or more of continuous touch,
such as rapid change of timer)
(Flashing)
Undetected pot auto shutoff
Small object auto shutoff
• No pot is placed on the IH heater.
• The pot has been removed while heating.
• The pot is not centred on the IH heater.
• An incompatible pot is used. (P.10)
• A metal kitchen tool, such as knife or spoon, is
placed on the top plate.
* If the above conditions are not remedied, the
display and the main power will turn off in
1 minute.
■
If you cannot resolve the above problems,
or any
error appears, contact the service centre.
→ Turn off the main power switch and breaker. Contact the dealer you have
purchased the appliance from or service agent for details concerning the
2-digit number following “ ”.
Note
• For the service centre contact list, refer to the Guarantee Certi fi cate.
If any of the following error indications appears, check the cause and deal with it.
After the cause is eliminated, touch or . Then, the error indication
will disappear.
• You can also clear the error with ,
and the and errors with .