Panasonic KXMB2000E, Руководство по эксплуатации

Страница: 41 / 120

6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper.
M
Resolution
N
M
Contrast
N
M
Redial
N
M
Fax
N
M
Start
N M
Set
N
M
Quick Scan
N
1
If the M Fax N light is OFF, turn it ON by pressing
M Fax N .
2
Set the original (page 19).
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 41.
R To select the contrast, see page 41.
4
Dial the fax number.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
5
Press M Quick Scan N to scan the document into
memory.
R Wait until “
SCAN:PRESS SET
” “
SEND:PRESS
START
” is displayed.
6
Place the next page on the scanner glass. A M Set N
R To send more pages, repeat this step.
7
M Start N
Note:
R To stop sending, see page 75.
R You can change the default operation mode (feature
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on
page 59).
To select the resolution
1.
Press M Resolution N repeatedly.
– “
STANDARD
” : For normal-sized characters.
– “
FINE
” : For small-sized characters.
– “
SUPER FINE
” : For very small-sized characters.
– “
PHOTO
” : For photographs, shaded drawings,
etc.
2. M Set N
R Using the “
FINE
” , “
SUPER FINE
” and “
PHOTO
”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press
M Contrast N repeatedly. A M Set N
Note:
R You can save the previous contrast setting (feature
#462 on page 59).
To redial the last number
M Redial N
R If the line is busy, the unit will automatically redial the
number up to 5 times.
Note:
R To stop sending, see page 75.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or phonebook.
3. When using the scanner glass, press M Quick
Scan N . The unit will scan 1 page. Place the next
document on the scanner glass and press M Set N .
Repeat this until all the documents are scanned, then
press
M Start N .
When using the automatic document feeder,
press M Start N .
R If the document exceeds the memory capacity, the
reservation for that document will be cancelled. You
must send the entire document manually.
Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 60). For an
explanation of the messages, see page 76.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 99. To print it automatically after every 30 new
41
6. . Fax (KX-MB2025/KX-MB2030 only)
6. Fax (KX-MB2025/KX-MB2030 only)