Panasonic KXMB2000E, Руководство по эксплуатации

Страница: 60 / 120

8.3 Fax features (KX-MB2025/KX-MB2030 only)
Feature/Code Selection
Changing the TEL/FAX
delayed ring count
MBNM 2 NM 1 NM 2 N
If you use an extension telephone in TEL/FAX mode, select the desired number
of times the extension telephone rings before the unit answers the call.
M 1 N “
1
”
M 2 N “
2
” (default)
M 3 N “
3
”
M 4 N “
4
”
M 5 N “
5
”
M 6 N “
6
”
M 7 N “
7
”
M 8 N “
8
”
M 9 N “
9
”
Note:
R See page 48 for details.
Erasing all items stored for
the one-touch dial and
phonebook
MBNM 2 NM 8 NM 9 N
M 0 N “
NO
” (default)
M 1 N “
YES
”
R Disconnect the telephone line cord, USB cable and LAN cable (KX-MB2030
only) before activating this feature.
To erase all items:
1.
M Menu N A MBNM 2 NM 8 NM 9 N
2. Press M 1 N to select “
YES
” . A M Set N
3. Press M 1 N to select “
YES
” . A M Set N A M Menu N
Printing a sending report
MBNM 4 NM 0 NM 1 N
M 0 N “
OFF
” : Sending reports will not be printed.
M 1 N “
ON
” : A sending report will be printed after every fax transmission.
M 2 N “
ERROR
” (default): A sending report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
MBNM 4 NM 0 NM 2 N
M 0 N “
OFF
” : The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
M 1 N “
ON
” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 41).
Changing the receiving mode
in the manual answer setting
MBNM 4 NM 0 NM 4 N
M 1 N “
TEL
” (default): Telephone mode (page 48)
M 2 N “
TEL/FAX
” : Telephone/Fax mode (page 48)
Sending documents
overseas
MBNM 4 NM 1 NM 1 N
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
NEXT FAX
” : This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
M 2 N “
ERROR
” (default): When the previous fax transmission fails and you wish
to re-send the document.
Note:
R This feature is not available for broadcast transmission.
R Calling charges may be higher than usual.
60
8. Programmable Features