ENGLISH
1
Getting Started
Location of controls (see the picture
)
A
1
RECALL Button
2
REDIAL Button
3
RINGER Selector
(on the
bottom of the unit)
Settings (see the picture
)
B
1
To Single-Line Telephone
Jack
2
Telephone Line Cord
3
RINGER Selector
4
Handset
5
Handset Cord
1
Connect the handset cord.
2
Connect the telephone line cord, then lift the handset to
confirm the dial tone.
3
Set the RINGER selector to HIGH, LOW or OFF.
(See the picture
. Ex. “LOW” is selected.)
≥
When set to OFF, the unit will not ring.
C
2
Operation
Making Calls
1
Lift the handset.
2
Dial a phone number.
≥
If you misdial, hang up and start again from step 1.
3
When finished talking, hang up.
To redial the last number dialed
1
Lift the handset.
2
Press .
≥
will dial the last number you called manually.
Answering Calls
1
When the unit rings, lift the handset.
2
When finished talking, hang up.
3
Special Features
Using the recall feature
is used to access special telephone services (optional)
such as call waiting. Contact your telephone company for
details.
Pressing
allows you to use special features of your
host PBX such as transferring an extension call.
Please read before use and save.
1-A
1-B
2-A
2-B
3-A
4
Things You Should Know
Wall Mounting (See the picture
)
1
Screws
2
To Single-Line Telephone
Jack
1
Connect the telephone line cord to the unit.
2
Install screws using the wall template (see the left side).
Connect the telephone line cord to Single-Line Telephone
Jack. Mount the unit, then slide down.
≥
To temporarily set the handset down during a conversation,
place it as shown in the picture
.
E
D
Before Requesting Help
Safety Instructions
Take special care to follow the safety suggestions listed
below.
Installations
Environment
1) Do not use this unit near water—for example, near a
bathtub, washbowl, sink, etc. Damp basements should
also be avoided.
2) The unit should be kept away from heat sources such as
radiators, kitchen range, etc. It also should not be placed
in rooms where the temperature is less than 5
o
C or greater
than 40
o
C.
Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and
liquids are not spilled into, the unit. Do not subject this unit
to excessive smoke, dust, mechanical vibration or shock.
3) Place the unit on a flat surface.
Lightning surge
This unit has already been equipped with a built-in lightning
protection circuit. However, we recommend that you install
lightning protection on the telephone line, if your area has a
high incidence of lightning strikes.
To install the above option, please contact your local sales
shop.
≥
Lightning damage is not covered in the warranty even if
lightning protection is installed.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF
MOISTURE.
If there is any trouble, disconnect the unit from the telephone
line and connect a known working phone. If the known
working phone operates properly, do not reconnect the unit
to the telephone line until the trouble has been repaired. If
the known working phone does not operate properly, consult
your telephone company.
4-A
4-B
4-C
Accessories
∑
Handset. . . . . . . . . . . . . . . . . . . . one
∑
Handset Cord . . . . . . . . . . . . . . . one
∑
Telephone Line Cord . . . . . . . . . . one
Problem
The unit does not
work.
The unit does not
ring.
Remedy
≥
Check the settings (1-B).
≥
The RINGER selector is set to
OFF. Set to HIGH or LOW (1-B).
