Useful Information
51
Industry Canada Notices and other information
NOTICE:
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications. This is confirmed by the
registration number. The abbreviation, “IC:”,
before the registration number signifies that
registration was performed based on a
Declaration of Conformity indicating that
Industry Canada technical specifications were
met. It does not imply that Industry Canada
approved the equipment.
And, the term “IC:” signifies that Industry
Canada radio technical specifications were met.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be installed
using an acceptable method of connection. The
customer should be aware that compliance with
the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
coordinated by a representative designated by
the supplier. Any repairs or alterations made by
the user to this equipment, or equipment
malfunctions, may give the telecommunications
company cause to request the user to
disconnect the equipment.
requirement that the sum of the Ringer
Equivalence Numbers of all the devices does
not exceed 5.
The Ringer Equivalence Number (REN) of this
unit:
(found on the bottom of the unit).
NOTICE:
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
Privacy of communications may not be ensured
when using this telephone.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or prevent
such interference, the base of the cordless
telephone should not be placed near, or on top
of, a TV or VCR. If interference is experienced,
move the cordless telephone further away from
the TV or VCR. This will often reduce, or
eliminate, interference.
RF Exposure Warning:
NOTICE:
The
Ringer Equivalence Number
(REN)
assigned to each terminal device provides an
indication of the maximum number of terminals
allowed to be connected to a telephone interface.
The termination on an interface may consist of
any combination of devices subject only to the
Users should ensure, for their own protection,
that the electrical ground connections of the
power utility, telephone lines and internal metallic
water pipe system, if present, are connected
together. This precaution may be particularly
important in rural areas.
Caution:
Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
L
This product complies with IC radiation
exposure limits set forth for an uncontrolled
environment.
L
To comply with IC RF exposure requirements,
the base unit must be installed and operated
20 cm (8 inches) or more between product and
all person’s body (excluding extremities of
hands, wrist and feet).
L
This product may not be collocated or operated
in conjunction with any other antenna or
transmitter.
L
The handset may be carried and operated with
only the specific provided belt-clip. Other
non-tested belt-clips or similar body-worn
accessories may not comply and must be
avoided.
TG9391C(e).book Page 51 Wednesday, August 27, 2008 2:36 PM
