Preparation
12
Connecting the telephone line cord
Refer to one of the following methods depending on your situation:
– To connect to a 2-line telephone jack: page 12
– To connect to 2 single-line telephone jacks: page 12
– If you use the unit as a single-line telephone only: page 12
Connect the telephone line cord until it clicks into the base unit and telephone line jack.
To connect to a 2-line telephone jack
To connect to 2 single-line telephone jacks
If you use the unit as a single-line telephone only
Be sure to connect the telephone line cord to LINE 1/2 to allow usage of the unit during a power failure
(page 11). Change the line selection mode from
“
Auto
”
to
“
Line1
”
Note:
L
“
Check tel line 2
”
is displayed on the unit. To erase it, see page 46.
4-wire
cord
To 2-line telephone jack (RJ14C)
“
GREEN
” plug
4-wire
cord
Line 2
Line 1
2-wire
cord
To single-line
telephone jacks (RJ11C)
“
GREEN
” plug
“Transparent” plug
2-wire
cord
To single-line telephone jack (RJ11C)
“Transparent” plug
TG9391C(e).book Page 12 Wednesday, August 27, 2008 2:36 PM