Programming
22
*3 The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
*4 Available for: KX-TGA840C handset
*5 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*6 You can select whether the handset display backlight is dimmed or turned off
completely after being placed on the base unit or charger.
–
“
On
”
: Backlight is dimmed.
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*7 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you select
a melody, you cannot distinguish lines by their ringers.
*8 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*9 When the ringer volume is turned off,
~
is displayed and the handset does not ring
for outside calls.
However even when the ringer volume is set to off, the handset rings at the low
level for alarm (page 23), and intercom calls, and paging (page 33).
*10The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
*11Generally, the line mode setting should not be adjusted. If
S
is not displayed
when another phone connected to the same line is in use, you need to change the
line mode to
“
A
”
.
*12This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
*13You can select a wallpaper design to be shown on the handset display when in
standby mode. If wallpaper is set to
“
Off
”
, the colour you selected as the display
colour (page 20) is used.
*14Date and time are displayed in large characters.
TG8412C(e).book Page 22 Tuesday, February 3, 2009 1:41 PM