Programming
18
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L
Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{
MENU
}
(centre of joystick)
2
Select the desired top-menu by pushing the joystick in any direction.
i
{
SELECT
}
3
Push the joystick down or up to select the desired item in sub-menu 1.
i
{
SELECT
}
L
In some cases, you may need to select from sub-menu 2.
i
{
SELECT
}
4
Push the joystick down or up to select the desired setting.
i
{
SAVE
}
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press
{
OFF
}
.
Note:
L
See page 20 for the default settings.
Main menu
Sub-menu 1
Sub-menu 2
Page
Caller list
W
–
–
29
Set date / time
E
Date and time
*1
–
12
Alarm
–
23
Time adjust
*1
–
–
V.M. access
#
–
–
32
Intercom
x
–
–
33
TG8412C(e).book Page 18 Tuesday, February 3, 2009 1:41 PM
