Panasonic KX-TG8202C Скачать руководство пользователя

Страница: 43 / 56

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

*1 KX-TG8231/KX-TG8232

Display message

Cause/solution

Busy

The called handset is in use.

The handset you are calling is too far from the
base unit.

There is no handset registered to the base unit
matching the extension number you entered.

Other units are in use and the system is busy. Try
again later.

Error!!

Recording was too short. Try again.

Failed

Phonebook copy failed. Confirm the other
handset (the receiver) is in standby mode and try
again.

Incomplete

The receiver’s phonebook memory is full. Erase
the unnecessary phonebook entries from the
other handset (the receiver) and try again.

Memory full

The handset’s phonebook memory is full. Erase
unnecessary entries (page 21).

Messages full

Message memory becomes full. Erase
unnecessary messages (page 33).

No items stored

Your phonebook, caller list or redial list is empty.

No link to base.

Move closer to base,

try again.

The handset has lost communication with the
base unit. Move closer to the base unit and try
again.

Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.

The handset’s registration may have been
cancelled. Re-register the handset (page 40).

Please lift up and

try again.

A handset button was pressed while the handset
was on the base unit or charger. Lift the handset
and press the button again.

You must first

subscribe to Caller

ID.

You must subscribe to Call Display service. Once
you receive caller information after subscribing to
Call Display service, this message will not be
displayed.

TG8202C_TG8231C_8232C(e).book Page 43 Friday, July 27, 2007 4:48 PM

Содержание KX-TG8202C

























































Результаты поиска

Содержание KX-TG8202C

Отзывы:

Похожие инструкции для KX-TG8202C

Бренды по названию

Популярные бренды

Panasonic KX-TG8202C, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG8202C

Отзывы:

Похожие инструкции для KX-TG8202C

Бренды по названию

Популярные бренды