Preparation
15
L
After the handset is fully charged,
displaying “
Charge completed
”, it
may be left on the base unit or
charger without any ill effect on the
batteries.
L
The battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the base unit or
charger and let it charge for 7 hours.
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity
if the
handset is not on the base unit or
charger. Press
{
OFF
}
to turn the
display on again.
Symbols used in these
operating instructions
Setting up the unit
before use
Display language
You can select either “
English
” or
“
Français
” as the display language.
The default setting is “
English
”.
1
{
MENU
}
(centre of joystick)
2
Select
M
by pushing the joystick in
any direction.
i
{
SELECT
}
3
Push the joystick up or down to
select “
Change language
”.
i
{
SELECT
}
4
Push the joystick up or down to
select the desired language.
5
Press down the centre of the joystick
to save.
6
{
OFF
}
Note:
L
How to change from French back to
English:
1
{
MENU
}
(centre of joystick)
i
M
i
{
SÉLEC.
}
2
{V}
/
{^}
: “
Changer langue
”
i
{
SÉLEC.
}
3
{V}
/
{^}
: “
English
”
i
{
SAVE
}
i
{
OFF
}
Symbol
Meaning
{
}
The words in the brackets
indicate button names/
soft key names on the
handset and base unit.
Example:
Unit keys:
{C}
,
{
OFF
}
Soft keys:
{
C
}
,
{
REDIAL
}
i
Proceed to the next
operation.
“ ”
The words in quotations
indicate the menu on the
display.
Example:
“
Alarm
”
{V}
/
{^}
:
“ ”
Push the handset joystick
down or up to select the
words in quotations.
Example:
{V}
/
{^}
: “
Off
”
Symbol
Meaning
TG8202C_TG8231C_8232C(e).book Page 15 Friday, July 27, 2007 4:48 PM
