DECT repeater
Problem
Cause/solution
The unit does not work.
R
When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
R
When the indicators do not light green, move the unit
closer to the base unit.
R
The repeater mode is
“
Off
”
. Set the repeater mode to
“
On
”
(page 68).
R
Registration may have been cancelled. Deregister the
unit, then re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold
M
PROGRAM
N
.
2
While pressing and holding
M
PROGRAM
N
,
re-connect the AC adaptor.
3
Keep holding to press
M
PROGRAM
N
for about 10
seconds until the
indicator stops flashing and
lights red. Then release
M
PROGRAM
N
.
R
The
and
indicators light amber for a
moment then only the
indicator flashes red.
R
If the
indicator flashes green after releasing
M
PROGRAM
N
, deregistration failed. Deregisterthe
unit again.
Re-register:
1
DECT repeater:
Unplug the AC adaptor.
2
Base unit
: Press and hold
M
LOCATOR
N
for about 5
second, until the registration tone sounds.
R
The next step must be completed within 90
seconds.
3
DECT repeater:
Connect the AC adaptor, then wait
until the
indicator and
indicator light green.
4
Base unit:
To stop the registration tone, press
M
LOCATOR
N
.
While talking using the
handset, sound cuts in and out.
R
The handset is out of range. Move the handset closer to
this unit.
A repeating tone is heard while
talking using the handset.
or
The
indicator continues to
light amber and the
indicator
flashes green.
R M
PROGRAM
N
was pressed. The unit is in programming
mode. To exit, press
M
PROGRAM
N
again. Do not press
M
PROGRAM
N
, except when deregistering the unit.
79
Useful Information
TG78xxAZ(en)_0217_ver521.pdf 79
17/2/2016 11:47:40 AM
