Panasonic KX-TG7893AZ, Руководство по эксплуатации

Страница: 45 / 84

Viewing/editing/erasing call barred
numbers
Handset
1
M MENU N#217
2
MbN : Select the desired entry.
R To exit, press M OFF N .
3
To edit a number:
M EDIT N a Edit the phone number. a
M SAVE N a M OFF N
To erase a number:
M ERASE N a MbN : “ Yes ” a M SELECT N
a M OFF N
Base unit
1
M MENU N#217
2
MbN : Select the desired entry.
R To exit, press M EXIT N .
3
To edit a number:
M EDIT N a Edit the phone number. a
M SAVE N a M EXIT N
To erase a number:
M ERASE N a MbN : “
Yes
” a M SELECT N
a M EXIT N
Note for handset and base unit:
R When editing, press the desired dial key to
add,
M CLEAR N to erase.
Changing the unit’s region
setting/Resetting the base unit
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
region setting. First press
M SELECT N , then
proceed to step 2.
1
M MENU N#136
2
MbN : Select the desired country. a
M SELECT N
“
Australia
” = Australia
“
Newzealand
” = New Zealand
3
MbN : “
Yes
” a M SELECT N a M OFF N
Note:
R The following items will be deleted or reset
to their default settings:
– Answering system settings (page 35)
– New message alert
– Time adjustment
– Base unit ringer volume
– Base unit speaker volume
– Landline area code
– Line mode
– Privacy mode
– Bluetooth settings (page 38, 41)
– Ringer ID
– Talking Caller ID (Base unit setting only)
– Caller list
– Voice mail messages and access
number
– Cellular phones settings (Base unit
setting only) (page 37, 41)
– Night mode (Base unit setting only)
R The following items will be retained:
– Date and time
– Shared phonebook
– Handset name
– Repeater mode
– Recordings, including your greeting
message, and caller messages
– Call screening
– Call barred list
– Cellular phones pairing
– Headset pairing
R If you select the desired country in step 2,
the following default setting will be changed
for the selected country’s default setting:
– Recall time (page 40)
R After changing the unit’s region setting/
resetting the base unit,
may be
displayed on the handset momentarily. This
is normal and the handset can be used
once
is displayed.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
model.
45
Programming
TG78xxAZ(en)_0217_ver521.pdf 45 17/2/2016 11:47:39 AM