*7 If you select one of the melody ringer tones, it will continue to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*8 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*10 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*11 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
guide for more information on the key finder.
*12 For models with supplied key finders, the display shows
“1:
Finder1
”
.
*13 If you register 2 or more key finders.
*14 If you have 2 or more key finders.
*15 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*16 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*17 The recall time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company “call waiting” service by having
the recall time set at
“
100 ms
”
, and then follow your service provider/telephone company
“call waiting” instructions to operate this service. (for Australia)
*18 The default setting will be as follows if you select the following regional code when changing
the unit’s region setting (page 45):
“
Newzealand
”
=
“
600 ms
”
*19 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
*20 This setting is available when a cellular phone is paired.
*21 This setting is available when a headset is paired.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R
Set the date and time beforehand
(page 17).
Handset
1
M
MENU
N#720
2
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to
step 7.
“
Once
”
An alarm sounds once at
the set time.
“
Daily
”
An alarm sounds daily at
the set time. Go to step 4.
42
Programming
TG78xxAZ(en)_0217_ver521.pdf 42
17/2/2016 11:47:39 AM
