DECT repeater
Problem
Cause/solution
The unit does not work.
R
When the indicators do not light, the AC adaptor is
not connected properly. Check the connections.
R
When the indicators do not light green, move the
unit closer to the base unit.
R
The repeater mode is
“
Off
”
. Set the repeater
mode to
“
On
”
(page 57).
R
Registration may have been cancelled. Deregister
the unit, then re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold
M
PROGRAM
N
.
2
While pressing and holding
M
PROGRAM
N
,
re-connect the AC adaptor.
3
Keep holding to press
M
PROGRAM
N
for about
10 seconds until the indicator stops
flashing and lights red. Then release
M
PROGRAM
N
.
R
The and indicators light amber for a
moment then only the indicator flashes
red.
R
If the indicator flashes green after
releasing
M
PROGRAM
N
, deregistration
failed. Deregisterthe unit again.
Re-register:
1
DECT repeater:
Unplug the AC adaptor.
2
Base unit
: Press and hold
M
LOCATOR
N
for
about 5 second, until the registration tone
sounds.
R
The next step must be completed within 90
seconds.
3
DECT repeater:
Connect the AC adaptor,
then wait until the indicator and indicator
light green.
4
Base unit:
To stop the registration tone, press
M
LOCATOR
N
.
While talking using the
handset, sound cuts in and
out.
R
The handset is out of range. Move the handset
closer to this unit.
69
Useful Information
TG76xxAZ(en)_0207_ver012.pdf 69
2012/02/07 15:34:49