Panasonic KX-TG7653AZ, Руководство по эксплуатации

Страница: 42 / 76

Ringer ID
You can select the desired ringer tone to
a group that each phonebook entry is
assigned (page 27). When a call is
received from a caller assigned to a
group, the ringer tone you selected for
that group rings instead of the called
line’s ringer tone (page 17, 31, 33) after
caller information is displayed. If you
select
“
Current ringer
” (default),
the unit uses the called line’s ringer tone
when calls from this group are received.
R The ringer may be changed after the
2nd ring.
1
M N a M MENU N
2
MbN : “ Group ” a M SELECT N
3
MbN : Select the desired group. a
M SELECT N
4
MbN : Select the desired ringer tone.
a M SAVE N
5
M OFF N
Caller list
Important:
R Only 1 person can access the caller
list at a time.
R Make sure the unit’s date and time
setting is correct (page 15).
Viewing the caller list and
calling back
n Using a cellular line
1
MFN CID
2
Press M N to search from the most
recent call, or M N to search from the
oldest call.
3
To call back, press M SELECT N .
To exit, press M OFF N .
4
M CELL N
R The unit starts dialling when:
– only 1 cellular phone is
registered.
– a specific line is set to make
cellular calls (page 19).
5
MbN : Select the desired cellular
phone. a M SELECT N
n Using the landline
1
MFN CID
2
Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3
To call back, press M N .
To exit, press M OFF N .
Note:
R If the entry has already been viewed
or answered, “ ” is displayed, even if
it was viewed or answered using
another unit.
R In step 2, if is displayed, not all of
the information is shown. To see the
remaining information:
Press
MEN . To return to the previous
screen, press MFN .
R or indicates the caller
information was received from the
cellular line.
R If you do not want to dial the area
code when making landline calls from
the caller list, you can store the area
code which you want the unit to delete
automatically (page 42).
Storing an area code to be
deleted automatically (for
landline call)
In some situations, phone numbers
stored automatically in the caller list
(page 42) will include area codes. If you
do not want to dial the area code when
making landline calls from the caller list,
you can store the area code which you
want the unit to delete automatically.
Example: You have stored the area code
“09”. If you make a landline call from the
42
Caller ID Service
TG76xxAZ(en)_0207_ver012.pdf 42 2012/02/07 15:34:47