Panasonic KX-TG7653AZ, Руководство по эксплуатации

Страница: 17 / 76

5
M OFF N
Note:
R Make sure that your cellular phone is
set to connect to this product
automatically. Refer to your cellular
phone’s operating instructions.
R Make sure you cancel your cellular
phone’s current registration if you
want to register it to the other line
(page 19).
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and
receives calls for a cellular line. When
“
All
” is selected, all handsets and the
base unit ring.
1
M MENU N
2
For CELL 1: #6271
For CELL 2: #6272
3
MbN : Select the desired handset or
“
All
” .
4
M SAVE N a M OFF N
Note:
R When you select a specific handset to
receive calls for a cellular line, other
handsets cannot answer the calls.
R When you change the setting to
“ All ” , the base unit ringer volume
also returns to the lowest level even if
the ringer volume has been changed.
Ring as cell mode
Once this feature is turned on, the
handset and base unit ring using the
same ringer tone as your cellular phone.
The following settings are available:
–
“
Off
” : Turn this feature off to use the
ringer tones of the handset and base
unit. Caller information is announced
depending on the Talking Caller ID
setting (page 33).
– “
On (with Talking CID)
”
(default): The handset and base unit
use your cellular phone’s ringer tone.
Caller information is announced even
if the Talking Caller ID is turned off.
– “
On (without Talking CID)
” :
The handset and base unit use your
cellular phone’s ringer tone. Caller
information is not announced even if
the Talking Caller ID is turned on.
Important:
R To use this feature, your cellular
phone must support Bluetooth in-band
ringtone. Refer to your cellular
phone’s operating instructions.
1
M MENU N
2
For CELL 1: #6141
For CELL 2: #6142
3
MbN : Select the desired setting.
4
M SAVE N a M OFF N
Note:
R The units use the preset ringer tones
(page 33) instead of your cellular
phone’s ringer tone when a cellular
call is being received if:
– your cellular phone is in night mode
(depending on your cellular phone).
– 2 handsets are sharing a landline
call.
R If your cellular phone is in night mode
with
“
On (with Talking CID)
”
set, the unit announces caller
information even when Talking Caller
ID is turned off (page 33).
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
Select “
Off
” in step 3, “Ring as cell
mode”, page 17.
17
Link to Cell
TG76xxAZ(en)_0207_ver012.pdf 17 2012/02/07 15:34:46