Useful Info
rmation
Answering
System
Preparatio
n
37
Making Calls
T
e
lephone System
For assistance, please call: 1-800-211-PANA(7262)
N
When the handset is not in use, you can also turn this feature on or off by
performing the following steps:
1. Press
[MENU]
while the handset is not in use.
2. Scroll to “
Voice enhancer
” by pressing
[
d
]
or
[
B
]
, then press the soft key
(
).
3. Select “
On
” or “
Off
” by pressing
[
d
]
or
[
B
]
.
4. Press the soft key (
), then press
[OFF]
.
Using the Base Unit
•
To switch to the handset while using the base unit speakerphone:
— If the handset is off the base unit, press the line soft key (
) or (
) on
the handset, then press
[SP-PHONE]
on the base unit.
— If the handset is on the base unit, just lift up.
•
The line buttons show the status of each line (p. 38).
To adjust the speaker volume during a conversation
To increase volume, press
[
B
]
. To decrease volume, press
[
d
]
.
•
There are 8 volume levels. If you try to increase/decrease volume when it is at the
maximum/minimum level, the base unit beeps 3 times. The level is displayed on
the base unit.
1
Press
[SP-PHONE]
.
•
The SP-PHONE indicator lights.
•
A free line is automatically selected
and the line button lights. (To change
the line selection, see page 70.)
•
You can select a line by pressing a
line button that does not light, instead
of pressing
[SP-PHONE]
.
2
Dial a phone number.
•
If you misdial, press
[SP-PHONE]
and start again from step 1.
3
When the other party answers, talk
into the
MIC
(microphone).
4
To hang up, press
[SP-PHONE]
.
•
The SP-PHONE indicator and line
button lights go out.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•
Talk alternately with the other party in a quiet room.
•
If you or the other party has difficulty hearing, press
[
d
]
to decrease the
speaker volume.
SELECT
SAVE
Base Unit
[REDIAL/PAUSE]
[
B
]
,
[
d
]
[HOLD]
MIC
[SP-PHONE]
and Indicator
LINE Buttons
LINE1
LINE2
TG6500.book Page 37 Friday, June 25, 2004 6:56 PM
