Panasonic KX-TG5871AL Скачать руководство пользователя страница 78

Страница: 78 / 88

Useful Information

Phonebook

I cannot have a
conversation using the
headset.

Make sure that an optional headset is connected
properly (page 73).

If “

SP-phone

” is displayed on the handset, press

{C}

to switch to the headset.

Use only the Panasonic KX-TCA88AL headset.

I cannot page the
handset or base unit.

The called handset is too far from the base unit.

The called unit is in use. Try again later.

I cannot make a voice
announcement.

Other handsets are in use. Try again later.

I cannot turn the clarity
booster feature on.

Another handset is already using this feature. Only one
handset can use this feature.

If 3 handsets are on a conference call with an outside
party, this feature cannot be used by any of the
handsets.

Problem

Cause & solution

I cannot store an item in
the phonebook.

You cannot store an item in the phonebook while the
handset is in talk, speakerphone or intercom mode, or
while listening to messages.

Do not pause for over 1 minute while storing.

Dial lock is turned on. To turn it off, see page 52.

While storing an item in
the phonebook, the
handset starts to ring.

A call is being received. Answer the call and start again
from the beginning after hanging up.

Copying stopped with an
item displayed.

The destination handset may have lost communication
with the base unit, or the destination handset user may
have pressed

{C}

{s}

The displayed phonebook item was not copied to the
handset. Press

{

OFF

}

. Confirm that the destination

handset is in standby mode (i.e., not in use) and try
again.

The display exits the
phonebook while
searching.

The handset automatically exits after 1 minute of
inactivity.

Problem

Cause & solution

TG5871AL.book Page 78 Friday, June 17, 2005 7:01 PM

Содержание KX-TG5871AL

























































































Результаты поиска

Содержание KX-TG5871AL

Отзывы:

Похожие инструкции для KX-TG5871AL

Бренды по названию

Популярные бренды

Panasonic KX-TG5871AL, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG5871AL

Отзывы:

Похожие инструкции для KX-TG5871AL

Бренды по названию

Популярные бренды