Panasonic KX-TG5240AL Скачать руководство пользователя страница 88

Страница: 88 / 100

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on
Your Display...” (p. 85–87) for the Cause & Remedy.

Telephone System

Problem

Cause & Remedy

“

No link to base.

Move closer to
base and try
again.

” is displayed and an

alarm tone sounds.

•

The handset has lost communication with the
base unit. Walk closer to the base unit, and try
again.

•

Confirm the base unit’s AC adaptor is plugged
in.

•

Raise the base unit antennas.

•

The handset’s registration may have been
cancelled. Re-register the handset (p. 84).

Static, sound cuts in/out,
fades. Interference from other
electrical units.

•

Move the handset and base unit away from
other electrical appliances (p. 6).

•

Walk closer to the base unit.

•

Raise the base unit antennas.

•

Turn on the Clarity Booster feature (p. 31).

•

Your unit is connected to a telephone line with
ADSL service. We recommend connecting a
noise filter (contact your ADSL service
provider) to the telephone line between the
base unit and the telephone line jack.

The base unit and/or handset
does not ring.

•

The ringer volume is turned off. Set to high,
medium, or low (p. 18, 19).

•

If more than one other user is using the
handset and/or base unit, the handset/base
unit may not ring. Users will hear incoming
call tones (p. 61).

The handset display is blank.

•

If the handset display is blank, fully charge the
battery (p. 13).

You cannot program any
function items.

•

Programming is not possible while the
handset and/or base unit is being used.

•

Do not pause for over 60 seconds while
programming.

•

Walk closer to the base unit.

•

While another user is listening to messages or
the Answering System is handling a call, you
cannot program. Try again later.

•

When the dial lock is turned on, you cannot
store phone numbers (p. 41, 48). To turn the
mode off, see page 63.

TG5240AL.fm Page 88 Friday, June 11, 2004 5:22 PM

Содержание KX-TG5240AL





































































































Результаты поиска

Содержание KX-TG5240AL

Отзывы:

Похожие инструкции для KX-TG5240AL

Бренды по названию

Популярные бренды

Panasonic KX-TG5240AL, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG5240AL

Отзывы:

Похожие инструкции для KX-TG5240AL

Бренды по названию

Популярные бренды