The small indentation just below the FLASH button is the microphone. The two metal ridges at the bottom of the
cordless handset are the charge contacts.
With the handset still facing you, you will find the headset jack on the left side of the cordless handset, parallel
to the TALK button. It has a rubber cover that can be opened by pulling down, and is not removable. Finally, on
the reverse side of the cordless handset is a circular, textured area, which is the speakerphone’s speaker.
Charger unit
The cordless handset’s charging cradle is located in the center of the charger unit, and has a single indicator light
beneath it. The charging cradle is about 2 inches wide and 1 inch deep. The cordless handset is placed in this
cradle with the cordless handset’s buttons facing the front of the charging cradle. The unit will beep when the
cordless handset is properly placed in the cradle for charging.
PQQX13561YB
May, 26 2003
