23
Preparation
For assistance, please call: 1-800-211-PANA(7262)
To check the recorded greeting message
Press
(GREETING)
.
•
The greeting message will be played.
To erase the recorded greeting message
Press
(GREETING)
, and then press
(ERASE)
while the message is being played.
•
The unit will answer a call with a pre-recorded greeting message.
Pre-recorded greeting message
If you do not record a greeting message (p. 22), one of two messages will be
played when a call is received, depending on the caller’s recording time (p. 24).
To check the pre-recorded greeting
, press
(GREETING)
.
•
A pre-recorded greeting will be played as follows:
■
When the recording time is set to “1 minute”, “2 minutes” or “3 minutes”:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
■
When the recording time is set to “Greeting only”:
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored on a “flash memory” IC chip and will not be affected
by power failures. All messages are saved until you erase them.
3
When finished, press
(GREETING)
.
•
The unit will automatically play back the recorded greeting.
•
You can also finish recording by pressing
(STOP)
.
•
To change the greeting, start again from step 1.
•
If
“
”
displays, 6 beeps sound and “
Your greeting was not recorded. Record your
greeting again
.” is announced, start again from step 1.
To adjust the speaker volume:
9 levels (0–8) are available while using the
answering system. To increase, press
Ñ
.
To decrease, press
Ö
.
RINGER
FULL
BOX
1
BOX
2
BOX
3
OFF
OFF
Ex. Level 8
Содержание KX-TG2730S - 2.4 GHz DSS Expandable Cordless...
Страница 103: ......