Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless..., Руководство по эксплуатации

Страница: 65 / 104

65
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Setting the Mailbox Password
(for Mailbox 2 and 3)
You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized
people from accessing the mailbox and listening to the messages. Assign 2-digit
password (00–99) to Mailbox 2 or 3. Each password and the remote code (p. 75)
must be unique. Once the password is assigned to Mailbox 2 or 3, no one can
access the mailbox to listen to messages without entering the password.
Make sure the base unit and the handset are not being used.
1 Press
(CONF/FUNCTION)
, and scroll to
“
Initial setting
” by pressing
Ö
or
Ñ
, and press
á
.
2
Scroll to “
Set answering
” by pressing
Ö
or
Ñ
, and press
á
.
3 Scroll to “
Set mailbox2&3
” by pressing
Ö
or
Ñ
.
4 Press
á
.
5
Select the mailbox by pressing
Ñ
(Mailbox 2) or
Ö
(Mailbox 3).
•
If the password has already been assigned to
the mailbox, it is displayed.
6 Enter a password using a 2-digit number
(00–99)
.
•
If you entered a wrong number, press
(HOLD/CLEAR) and enter the password again.
7
Press the right soft key ( ).
•
A beep sounds.
•
If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 75) or the entered password was one-digit. Start again
from step 6 and select another password.
•
To exit the programming mode, press (OFF) .
To check the password: Repeat steps 1 to 5.
•
The password is displayed. When finished, press
(OFF)
.
To erase the password
Press
(HOLD/CLEAR)
in step 6, and press the right soft key ( ).
•
You will be able to access the mailbox without entering the password.
SAVE
SAVE
Set password
Mailbox2 :--
S A V E
Set password
F
=Mailbox2
G
=Mailbox3
Set password
Mailbox2 :22
S A V E
Copy directory
H
Initial setting
2Way radio mode
Remote code
H
Set mailbox2&3
---------------
Set tel line
H
Set answering
Set base unit