*9 KX-TG7741/KX-TG275SK series: page 3
*10 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Call Display subscribers only)
To use this feature, set the date and time first (page 17).
*11 If you subscribe to a distinctive ring service, select a tone (tone 1 to 5). If you select a
melody, you cannot distinguish lines by their ringers.
*12 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*13 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*14 If you subscribe to a Call Display service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*15 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*16 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
40
Programming
TG7731_41C_(en-en)_1207_ver.021.40 40
2011/12/07 19:54:00
