Link to cell feature
To use this feature, you must first register and
connect your cellular phones to the base unit
(page 18).
Your cellular phones must have Bluetooth
wireless technology that is compatible with this
product.
This feature allows you to:
– make or answer cellular calls using your
home phone (handset or base unit) with
better reception.
– maximize the benefits of cellular services
(such as free night and weekend calls, or
cellular to cellular call plans) by utilizing
unused peak minutes with your home
phone.
– conserve the battery power of your cellular
phone while the unit is on a cellular call.
(We recommend charging your cellular
phone during the cellular call as your
cellular phone battery is being consumed.)
Important:
R
Up to 2 cellular phones can be registered.
However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
R
Locate your cellular phone near the base
unit. If the cellular phone is too close to the
base unit during a cellular call, you may
hear noise. For best performance, we
recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet)
away from the base unit.
Trademarks
R
The Bluetooth
®
word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Panasonic
Corporation is under license. All other
trademarks identified herein are the
property of their respective owners.
Registering a cellular
phone
Important:
R
For more details and the list of compatible
cellular phones, please visit our Web site:
http://www.panasonic.ca/link2cell
R
Before registering a Bluetooth enabled
cellular phone to the base unit:
– we recommend you change the PIN
(page 21).
– make sure that no Bluetooth device such
as a Bluetooth headset is connected to
your cellular phone.
1
Handset:
M
MENU
N
For CELL 1:
#6241
For CELL 2:
#6242
R
After the CELL 1 or CELL 2 indicator
on the base unit starts flashing red, the
rest of the procedure must be
completed within 5 minutes.
2
Your cellular phone:
While the CELL 1 or CELL 2 indicator is
flashing red, follow the instructions of your
cellular phone to enter the registration
mode.
R
Depending on your cellular phone, it
may ask you to enter the base unit PIN
(default:
“
0000
”
).
3
Handset:
Wait until a long beep sounds.
R
It may take more than 10 seconds to
complete registration.
R
When the CELL 1 or CELL 2 indicator
lights green, the cellular phone is
connected to the base unit. You are
ready to make cellular calls.
4
To select which unit receives calls for the
cellular line, press
M
OK
N
then continue
from step 3, “Selecting which unit
receives cellular calls”, page 19.
R
If not required, go to step 5.
5
M
OFF
N
Note:
R
Make sure that your cellular phone is set to
connect to this product automatically. Refer
to your cellular phone’s operating
instructions.
R
Make sure you cancel your cellular phone’s
current registration if you want to register it
to the other line (page 21).
18
Link to Cell
TG7731_41C_(en-en)_1207_ver.021.18 18
2011/12/07 19:53:58
