92
Clearing Settings
Base Unit Handset
Function
Factory preset
Call monitoring
ON
Message menu
ON
Recording mode
High quality
Auto message delete
OFF
Pager number
Clear
Pager on/off
OFF
Pager display No.
Clear
Display & Voice
English
Guidance Language
PIN for registration
Clear
Auto Attendant System OFF
Answering System
OFF
Line 1 & 2 greetings
Pre-recorded greeting
Number of rings
Toll Saver
Handset answer mode OFF
Function
Factory preset
Base unit ringer volume HIGH
Base unit ringer pattern
Pattern 1
Ring group
All extensions ring
Base unit Incoming
OFF
call tone
Dialing mode
Tone
Flash time
700 ms
Call restriction
OFF
Base unit line selection
AUTO
Line mode
A mode
C.WTG option mode OFF
General delivery
0000
mailbox password
Personal mailbox
1111–8888
password
(see page 62)
Direct HS. Access
ON
With the base unit
The following settings of the base unit and the registered cordless
handsets will return to the factory preset.
1
Press
(FUNCTION)
.
2
Press
or
until the arrow
points to “
Initialization
”,
and press
H
.
3
While “
Function
” is at the
arrow, press
H
.
Function
Factory preset
Ringer volume
HIGH
Ringer pattern
Pattern 1
Incoming call tone
ON
Line selection
AUTO
Auto talk
ON
Make sure that the base unit is in the standby mode.
4
Press
(CLEAR)
.
•
A beep sounds and “
Clear
” is
displayed.
•
To return to the standby mode,
press
(EXIT)
.
With the cordless handset
The following settings of the
cordless handset will return to the
factory preset.
1
Press
(FUNCTION)
.
2
Press
or
until the arrow
points to “
Initialization
”,
and press
H
.
3
While “
Function
” is at the
arrow, press
H
.
4
Press
(CLEAR)
.
•
A beep sounds and “
Clear
” is
displayed.
•
To return to the standby mode,
press
(EXIT)
.
Make sure that the cordless
handset is in the standby mode.