52
Setting the Key Lock
You can lock all the buttons and the navigator key of the cordless handset.
Only incoming calls are accepted until the key lock is cancelled.
Make sure that the cordless handset is in the standby mode.
Press and hold
(FUNCTION)
until a short beep
sounds.
•
In this mode emergency calls cannot be made. Key
lock mode must be cancelled.
To cancel the key lock
, press and hold
(FUNCTION)
until a short beep
sounds.
•
“
Key lock
” will disappear.
Handset
Key lock [1]
FLASH Button
Pressing
(FLASH)
allows you to use special features of your host PBX such
as transferring an extension call or accessing special telephone services
(optional) such as call waiting.
Selecting the flash time for each line
The flash time depends on your telephone exchange or host PBX. You can
select from flash times: “700, 600, 400, 300, 250, 110, 100 or 90 ms
(milliseconds)”. Your phone comes from the factory set to “700 ms”.
Make sure that the base unit is in the standby mode.
Base Unit
Base Unit Handset
4
Select the desired time by
pressing
or
for each line.
To move to the other line, press
H
or
I
.
5
Press
(ENTER)
.
•
A beep sounds.
•
To return to the standby mode,
press
(EXIT)
.
1
Press
(FUNCTION)
.
2
Press
or
until the arrow
points to “
Dial setting
”, and
press
H
.
3
Press
or
until the arrow
points to “
Set flash time
”,
and press
H
.
•
The current settings are displayed.
F l a s h t i m e
L i n e 1 L i n e 2
7 0 0 m 7 0 0 m
•
If you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call
etc.). Consult your PBX installer for
the correct setting.
Special Features