Preparation
10
Battery installation
1
Insert the batteries negative (
T
)
terminal first.
2
Close the handset cover.
Note:
L
Use only rechargeable batteries (page 5).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging,
i
and battery strength
icon are alternately shown on the display.
When the batteries are fully charged,
1
flashes.
Note:
L
It takes 7 hours to fully charge the
batteries, however, you can use the
handset before the batteries are fully
charged.
L
Clean the charge contacts (page 7) of the
handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Battery strength
Note:
L
When
3
flashes, recharge the handset
batteries.
3
will continue to flash until
the batteries have been charged for at
least 15 minutes.
L
If the handset is turned off, it will be turned
on automatically when it is placed on the
base unit.
Battery icon
Battery strength
1
High
2
Medium
3
Low
When flashing: Needs
to be charged.
TG1850NZ(e).book Page 10 Monday, December 27, 2004 3:22 PM
