Useful Information
40
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
I fully charged the
batteries, but
7
continues to flash.
L
Clean the charge contacts and charge again
(page 10).
L
The batteries may need to be replaced with new
ones (page 9).
I fully charged the
batteries, but the operating
time seems to be short.
L
Wipe the battery ends (
S
,
T
) and the unit
contacts with a dry cloth.
The handset display is
blank.
L
Confirm that the batteries are properly installed.
L
Fully charge the batteries (page 9, 10).
Problem
Cause/solution
w
is displayed, but I
cannot make a call.
L
The handset and base unit could not
communicate for some reason, such as
interference from other electrical appliances.
Perform the following:
– Move the handset and base unit away from
other electrical appliances.
– Move closer to the base unit.
Static is heard, sound cuts
in and out. Interference
from other electrical units.
L
Move the handset and base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust it (page
23).
I cannot make a call.
L
The dialing mode may be set incorrectly.
Change the setting (page 13).
L
Another handset is in use. Try again later.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is
connected properly (page 37).
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the handset.
L
The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
TG103xC.book Page 40 Wednesday, February 28, 2007 5:25 PM