Panasonic KX-TG1032C Скачать руководство пользователя страница 38

Страница: 38 / 48

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Busy

The called handset is in use.

The handset you are calling is too far from the
base unit.

There is no handset registered to the base unit
matching the extension number you entered.

Other units are in use and the system is busy. Try
again later.

Error!!

Recording was too short. Try again.

Failed

The handset you tried to copy phonebook items
to is in use. Try again later.

Incomplete

The destination handset’s phonebook memory is
full. Erase unnecessary items from the
destination handset’s phonebook (page 18).

Memory full

There is no space to store new items in the
phonebook. Erase unnecessary items (page 18).

Messages full

There is no space in memory to record new
messages. Erase unnecessary messages (page
27).

No items stored

Your phonebook, caller list or redial list is empty.

No link to base.

Move closer to base,

try again.

The handset has lost communication with the
base unit. Move closer to the base unit, and try
again.

Confirm that the base unit’s AC adaptor is
plugged in.

The handset’s registration may have been
cancelled. Re-register the handset (page 34).

Please lift up and

try again.

A handset button was pressed while the handset
was on the base unit or charger. Lift the handset
and press the button again.

Please set current

date & time.

In order to set the alarm, you must first set the
date and time (page 14).

TG103xC.book Page 38 Wednesday, February 28, 2007 5:25 PM

Содержание KX-TG1032C

















































Результаты поиска

Содержание KX-TG1032C

Отзывы:

Похожие инструкции для KX-TG1032C

Бренды по названию

Популярные бренды

Panasonic KX-TG1032C, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG1032C

Отзывы:

Похожие инструкции для KX-TG1032C

Бренды по названию

Популярные бренды