Panasonic KX-TDE100, Начало работы

Страница: 21 / 32

3.2 Connecting the PC
The Maintenance Console serves as an overall system programming tool for the PBX. The Maintenance
Console’s Quick Setup lets you easily configure the PBX to receive intercom and trunk calls, as well as apply
basic settings such as time and date.
To programme the PBX, connect it to the PC via the MNT or RS-232C port.
PC Connection
MNT Port
To LAN Port
To COM Port
RS-232C Port
PC
PC
To attach the ferrite core
3 cm
Pin Assignments
RS-232C (Cross Cable)
Pin No.
2
3
4
5
6
7
8
Pin No.
2
3
4
5
6
7
8
RS-232C Port COM Port
Pin No.
1
2
3
6
1
2
3
6
Pin No.
LAN (RJ45 Cable)
LAN Port (PC) MNT Port (PBX)
CAUTION
When connecting a PC to the PBX via the RS-232C port, it is necessary to keep the following in mind to
protect the system:
1.
Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable) are
conductive. If they are not conductive, make sure that both connector cases of the cable are firmly
connected.
2.
If this is not possible, connect the frame of the PBX to the frame of the PC using an earthing wire in
order to prevent difference in the electrical potentials.
Notice
When connecting a PC to the PBX via the MNT port, a fixed IP address must be assigned to the PC. For
information about fixed IP addresses, ask your network administrator.
Getting Started for Physical Cards 21
3.2 Connecting the PC
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM