Panasonic KX-TDE100, Начало работы

Страница: 13 / 32

3.
Turn the 4 screws clockwise, in the order indicated by the numbers 1 to 4, to fix the PSU.
Guide Rail
Back Board
Release Lever
Screws
1
3 2
4
Installing the Trunk/Extension Cards
1.
Insert the card along the guide rails.
2.
Holding the card as shown below, push the release lever in the direction of the arrow so that the card
engages securely with the connector on the back board.
3.
Turn the 2 screws clockwise to fix the card in place.
Guide Rail
Release
Lever
Back Board
Screws
Be sure to cover each slot in which no optional service card is installed by using a Blank Slot Cover. For details,
refer to "Covering the Blank Slots" in "3.2.7 Installing/Removing the Optional Service Cards" of the Installation
Manual.
Getting Started for Physical Cards 13
2.3 Installing the Option Units
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM