Panasonic KX-TDA50, Руководство по функциям

Страница: 163 / 668

1.20 Portable Station (PS) Features
Feature Guide 163
Explanation:
The PS ring group has four members which are in range of two different CSs. When a call arrives, each CS
uses one channel to ring all member PSs within its range.
The ICD group has one proprietary telephone (PT) member, as well as four PS members which are in range
of two different CSs. When a call arrives, each CS uses all two of its channels to ring each of the member
PSs within its range.
Conditions
• A maximum of 32 PS ring groups can be programmed.
• Each member of a PS ring group must be a PS, but each member does not need to be in range of the
same CS. When a call is directed to a PS ring group, all CSs connected to the PBX will try to ring
members of the group.
• PS ring groups do not have Log-in or Log-out features. There is no way for a PS to log-in to or log-out
from a PS ring group.
• A PS ring group may be assigned as a member of an ICD group, but the PS ring group cannot log-in
to or log-out from an ICD group. The PS ring group (and therefore its members) will always be logged-
in.
• When a PS is assigned to a PS ring group, the following settings are used if it receives a call directly,
but are disregarded when it receives a group call:
a)
Delayed Ringing (All PSs will ring simultaneously.)
b)
The incoming call display preference assigned to the PS through system programming.
c)
Features set on the PS, such as Call Forwarding (FWD). Note, however, that if a PS user has set
Do Not Disturb (DND), that PS will not ring for group calls either.
• When a call is directed to a PS ring group, the PBX will try to ring the group's members regardless of
whether or not they are already on another call. If all members of a PS ring group are busy when the
group is called, their PSs will not ring but the caller will hear a ringback tone.
• A PS ring group will only ring one call at a time on its member PSs. If a PS ring group is ringing one call
when another call is directed to the group, the group will appear busy to the caller. If a call is directed
to a specific PS within the group in this situation and the PS is available to answer calls, the PS will ring
as usual.
• The PBX will ring calls for only two PS ring groups at a time. In other words, if two calls directed to two
different PS ring groups are ringing, no other PS ring group calls will ring until one of the other ringing
calls is answered.
• If a PS in a PS ring group has set the DND feature for CO line calls, the PS will not ring for CO line calls
as well as intercom calls directed to the group.
• Compatible PS
A Panasonic KX-TD7680 and KX-TD7690 can be assigned to PS ring groups.
Feature Guide References
1.2.2 Incoming Call Distribution (ICD) Group Features
1.3.1.3 Do Not Disturb (DND)