manualshive.com logo in svg

Panasonic KX-TD816AL, Руководство по установке

Поделиться
Скачать
Panasonic KX-TD816AL Скачать руководство пользователя страница 201

S

3

Features

3-114

Features

*: Available for KX-TD1232 only.

• System administration can be performed on-line except for the

procedures of diagnosis.
If the system goes off-line, the system functions as if it was in power
failure. (Refer to Power Failure Transfer feature.)

Programming References

Section 4, System Programming,
[107]  System Password
[813]  Floating Number Assignment
[814]  Modem Standard*

Feature References

Section 3, Features,
System Programming with 

Station Message Detail

Digital Proprietary Telephone

Recording (SMDR)

Operation References

Not applicable.

S

ystem Programming with Digital Proprietary Telephone

Description

This system can be programmed with a personal computer or a
digital proprietary telephone (DPT).  
DPTs available for system programming are: KX-T7235 and KX-
T7230 (Display DPTs).
Two extensions are allowed to perform system programming. The
extensions available are:

(1) An extension that is connected to jack 1.
(2) An extension that is assigned as a manager.

For more information and programming instructions, refer to
Section 4, “System Programming.”

Conditions

• During system programming the system operates normally.
• During system programming the extension is considered to be busy. 
• The display on the DPT permits interactive programming.  
• Only one access is allowed to system programming at any one time.
• To access system administration, a valid password must be entered.

The password is factory-programmed and can be changed.

• A personal computer can be used to perform system programming.

Programming References

Section 4,  System Programming
[006] Operator / Manager Extension Assignment
[107] System Password

Содержание KX-TD816AL


























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды