Panasonic KX-TD500CE Скачать руководство пользователя страница 137

Страница: 137 / 376

1.5

Attended Features

Features Guide

137

(Example 3)

The caller is put in the waiting queue for 8 seconds (1T).

The caller is transferred to the Overflow destination.

(Example 4)

The caller hears OGM1, if available.

(Sample OGM 1)

•

What if OGM1 is busy?
The caller first hears ringback tone and then will hear OGM1 as soon as it becomes
available (Go to step 2).

•

What if OGM1 is OUS (Out-of-Service)?
Step 1 will be skipped (Go to step 2).

The caller is put in the waiting queue for 16 seconds (2T).

The caller hears OGM4.

(Sample OGM 4)

If OGM 4 is busy, the caller hears Music on Hold and then will hear OGM4 as soon as
it becomes available.

Same as step 2.

The caller is transferred to the Overflow destination.

Notes

•

The UCD Time Table procedure applies to outside calls (including transferred calls) only.

•

Any command after "TR," "RET" or "Blank" does not function.

•

If any unavailable OGM S(1-8) is assigned in the UCD Time Table, it will be ignored.

Sorry, all lines are busy.

Please wait a moment.

Sorry, all lines are still busy.

Please wait a moment.

1T TR
(1) (2)

UCD group

S1 2T S4 2T TR

(1) (2) (3) (4) (5)

Содержание KX-TD500CE

























































































































































































































































































































































































Результаты поиска

Содержание KX-TD500CE

Отзывы:

Panasonic KX-TD500CE, Руководство по функциям, Страница: 137 / 376

Результаты поиска

Содержание KX-TD500CE

Отзывы: