Panasonic KX-TD1232E, Руководство пользователя

Страница: 223 / 518

4-114
DPT Features
P
4.2 DPT Features
Paralleled Telephone Connection
A proprietary telephone (PT) can be connected in parallel with a single line telephone
(SLT). This feature allows you to set whether the paralleled SLT will ring or not, when
an incoming call is received.
To ring or not to ring a paralleled SLT
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (69).
3. Dial 1 or 0.
- 1 : to ring
- 0 : not to ring
• You hear a confirmation tone and then a dial tone.
• The display shows:
— (when set to ring)
or
— (when not set to ring)
4. Hang up or press the SP-PHONE/MONITOR button.
Conditions
• The default is “Parallel Off (No ring).”
• The PT can be used to perform normal operations whether or not the SLT is set to ring.
• When receiving a call:
— If SLT is set to ring, then both the PT and the standard telephone will ring except
when the PT is in “Handsfree Answerback” mode or Voice-Calling mode with the
“Alternate Calling — Ring/Voice” feature.
— If SLT is not set to ring, then only the PT rings. However, the SLT can answer the
call.
• When the SLT is in use, the display and the indicators of the PT will work in the same
way as if the PT is in use.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to
your telephone, and vice versa.
• The “XDP*” feature is available.
Parallel On
Parallel Off
1
2
3
1 0
or
4
9 6