Panasonic KX-TD1232E Скачать руководство пользователя страница 183

Страница: 183 / 518

4-74

DPT Features

4.2

DPT Features

Handsfree Operation

Allows you to dial and to talk to the other party without lifting the handset.

1. Press the SP-PHONE button.

• The microphone and the speaker are now activated and

handsfree operation is available.

Switching from handset to handsfree mode

1. Press the SP-PHONE button.

2. Hang up.

• Do not replace the handset without pressing the SP-

PHONE button, or the line will be disconnected.

Switching from handsfree to handset mode

1. Lift the handset.

Conditions

• Helpful hints for Handsfree operation:

— Use this unit in a quiet room for best performance.

— If the other party has difficulty hearing you, decrease the volume.

— If you and the other party speak at the same time, parts of your conversation will

be lost. To avoid this, speak alternately.

• Handsfree mode is cancelled if you do not start dialling within ten seconds.

• The KX-T7250 has a MONITOR button instead of a SP-PHONE button. It can be

used for handsfree dialling, etc., but it cannot be used for handsfree conversation.

• You can enable handsfree mode by pressing a CO or INTERCOM button.

• When “Full One-Touch Dialling” is enabled pressing One-Touch Dialling, DSS,

REDIAL or SAVE button provides handsfree mode.

Feature References

Full One-Touch Dialling

SP-PHONE

Содержание KX-TD1232E







































































































































































































































































































































































































































































































































Результаты поиска

Содержание KX-TD1232E

Отзывы:

Похожие инструкции для KX-TD1232E

Бренды по названию

Популярные бренды

Panasonic KX-TD1232E, Руководство пользователя

Результаты поиска

Содержание KX-TD1232E

Отзывы:

Похожие инструкции для KX-TD1232E

Бренды по названию

Популярные бренды