manualshive.com logo in svg

Panasonic KX-TD1232AL, Дополнение к руководству пользователя

Поделиться
Скачать
Panasonic KX-TD1232AL Скачать руководство пользователя страница 51

4.2

DPT Features

D

51

Conditions

• If the extension is already set as the destination of the “Call Forwarding,” “Do Not Disturb

(DND)” and “Do Not Disturb for Direct Dial In Calls” features, you cannot set this feature
and when you set this feature, you hear a reorder tone.

• When this feature is set, an incoming outside call (directed by Intercept Routing or DIL 1:1

extension) will be automatically transferred to the backup station (pre-assigned extension).
An incoming intercom call will send the DND tone to your extension.

• This feature does not work for the following calls: doorphone calls; recalls for hold; Timed

Reminder alarm.

• While the operator is set as the destination of the “Do Not Disturb (DND)” feature, even if

the operator is different from Day mode and Night mode, an incoming call will be
transferred to an operator.  If the operator is not assigned, an incoming call will be
transferred to the IRNA.

• When this feature is set, “Call Forwarding” and “Do Not Disturb for Direct Dial In Calls”

features are cancelled.

• A calling extension that has “Do Not Disturb (DND) Override” enabled can override your

extension when it is set to “Do Not Disturb (DND)” mode.

• If the destination extension has DND activated, then DSS button corresponding to it will

light up red.  This indicates to the proprietary telephone or DSS console user that the
destination extension is unavailable.

• A flexible button on the KX-T7250 (no FWD/DND button provided) can be assigned as the

FWD/DND button.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — FWD/DND Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Feature References

Call Forwarding

Do Not Disturb (DND) Override

Do Not Disturb for Direct Dialing In Calls

Intercept Routing (

→

see Installation Manual)

Содержание KX-TD1232AL



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды