manualshive.com logo in svg

Panasonic KX-TD1232AL, Дополнение к руководству пользователя

Поделиться
Скачать
Panasonic KX-TD1232AL Скачать руководство пользователя страница 104

6.2

SLT and ISDN Telephone Features

A

105

In “Option” mode

• You can enter any account code when needed.  It is possible to record a calling or called

party’s account code in the SMDR within fifteen seconds after the other party hangs up.

General

• It is not possible to enter an account code while having a conversation or hearing reorder

tone.

• There is no need for an account code entry when receiving incoming calls.
• Dialing “

” while entering an account code allows you to clear the number and re-enter.

• Pressing the Register Recall button while entering an account code cancels the entry.
• An account code can be up to five numeric digits (0 through 9).  After entering an account

code, the delimiter “#” or “99” must be entered (the entered account code should not be
“99” nor end with “9”).

• An account code can be stored into Memory Dialing (“Pickup Dialing (Hot Line),”

“System/Station Speed Dialing,” “Call Forwarding — to CO Line”).  The sequence to enter
an account code into Memory Dialing is as follows:

— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]

or

— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]

• If an entered account code does not match a stored account code when making a CO call, a

reorder tone is returned.

• If an entered account code matches a pre-assigned account code when making a CO call, the

charge fee of the account code is totalized.

• If you use an account code which is for a private call, the phone number of the destination

is not recorded on SMDR.

Programming References

• Station Programming (Section 2)

Charge Fee Reference — Account Code Charge Fee Reference, Account Code Set

• System Programming — Installation Manual & Installation Manual Addendum

[105] Account Codes
[508] Account Code Entry Mode
[601] Class of Service

Feature References

Station Message Detail Recording (SMDR) (

→

see Installation Manual)

Toll Restriction Override by Account Code Entry

*

Class of Service (COS) is used to define the features which are allowed for a group of extension.

Refer to the Installation Manual for programming and more details.

Содержание KX-TD1232AL



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды