Panasonic KX-TD1232AL, Дополнение к руководству пользователя

Страница: 14 / 154

14
2.2 Programming
Charge Fee Reference
Allows you to see, print out and clear charges. Charges are displayed per extension, CO line,
account code, department code, or the total of each can be referred to. There are seven
corresponding features as follows:
[PROGRAM] [99] [8] [ID Code] [1] Extension Charge Fee Reference
[2] CO Line Charge Fee Reference
[3] Total Extension Charge Fee Reference
[4] Account Code Charge Fee Reference
[6] All Clear
[7] Print the Charge Fee
[8] Account Code Set
Conditions
• System Programming determines the extension that can see charges.
• An identification code (ID code), set by System Programming, is required to see charges.
• The first display format – METER or CHARGE (AS$) – is selected by System
Programming. This can be switched manually at each extension.
• You may use the overlay while programming. In this case, the HOLD button becomes the
END button and the REDIAL button becomes the PREV button.
• The currency denomination is programmable by System Programming.
• If a different rate is assigned to each CO line, the extension charge fee, account code charge
fee and total extension charge fee meters will not be displayed correctly. In this case, the
meter is calculated by the rate assigned to CO1 and is displayed.
Programming References
• System Programming —Installation Manual & Installation Manual Addendum
[015] Charge Rate Fractional Point Assignment
[016] Charge Rate Assignment
[117] Charge Display Selection
[118] Charge Verification Assignment
[119] Charge Verification ID Code Set
[125] Assignment of Denomination