“
Using the Directory
48
1
Press
(FUNCTION/EXIT/CH)
.
2
While the arrow points to “
Save
directory
”, press
FWD/EDIT
(fl)
(
Yes
key).
≥
The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters, with the
dialing buttons, BACK
(fi)
or FWD/EDIT
(fl)
.
≥
See the steps for entering names and symbols
(p. 49).
≥
If a name is not required, press
(›)
(
Next
key) and go to step 5.
4
Press
(›)
(
Next
key).
5
Enter a phone number, up to 22 digits.
≥
Each time you press
(INTERCOM/CLEAR)
, a
character is erased from the right. To erase all
of the digits, press and hold
(INTERCOM/CLEAR)
.
6
Press
(›)
(
Next
key).
7
Press
FWD/EDIT
(fl)
(
Save
key).
≥
A beep sounds.
≥
To continue storing other items, repeat from step 2.
≥
To return to the standby mode, press
(FUNCTION/EXIT/CH)
.
≥
If a pause is required for dialing,
(REDIAL/PAUSE)
can be stored in a phone
number counting as one digit (p. 59) in step 5.
≥
You can exit the programming mode any time by pressing
(FUNCTION/EXIT/CH)
.
≥
If the display shows “
Directory full
” in step 2, the display will return to
step 1. Press
(FUNCTION/EXIT/CH)
to exit the list. To erase other stored items
from the directory, see page 55.
≥
If the display shows “
Save error
” in step 7, the item cannot be stored in the
directory. Try again from step 1.
Directory=
20 items
Enter name
21
4
=Next
Enter name
Tom Jones
21
4
=Next
Enter phone no.
1
Save directory
Calling pager
43
1
=Yes
0987654321
21
4
=Next
Tom Jones
0987654321
1
=Save
