Panasonic KX-PRX150AZ Скачать руководство пользователя страница 63

Страница: 63 / 72

Settings

Problem

Cause and/or solution

The display is in a
language I cannot read.

Change the display language (page 45).

I cannot turn on ECO
mode.

[Repeater mode]

is turned on (page 52), ECO mode is

automatically turned off and the

[ECO mode]

checkbox is not

displayed.

I cannot register a handset
to a base unit.

The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 49).

The maximum number of base units (4) is already registered to
the handset. Cancel unused base unit registrations from the
handset (page 51).

You entered the wrong base unit PIN. If you forget your PIN,
contact an authorised service centre.

Battery charge

Problem

Cause and/or solution

I fully charged the battery,
but the low battery
message is still displayed
and/or the operating time
seems to be shorter.

Clean the charge contacts of the handset and charger with a
dry cloth and charge again.

It is time to replace the battery (page 3).

Calls

Problem

Cause and/or solution

is displayed.

The handset is too far from the base unit. Move closer.

The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.

The handset is not registered to the base unit. Register it
(page 49).

During standby mode, the transmission range of the base unit
is reduced if ECO mode is on. If required, turn ECO mode off
(page 43).

Other Information

Содержание KX-PRX150AZ









































































Результаты поиска

Содержание KX-PRX150AZ

Отзывы:

Panasonic KX-PRX150AZ, Руководство по эксплуатации, Страница: 63 / 72

Результаты поиска

Содержание KX-PRX150AZ

Отзывы: