Panasonic KX-P8415 Скачать руководство пользователя страница 51

Страница: 51 / 62

Settings and Printing

Maintenance

Specifications

It is highly recommended that you keep the original carton and ALL packing materials. Should you
need to transport or ship your printer, please follow these instructions.

AFETY

AUTION

The printer weighs about 49.2 k

{108.4 lbs.}. It must be handled by two people.

OTES

Should you need to send your printer for service, consult your reseller first or Panasonic.

Please use the original carton and all of the original packing materials.

If you do not have the packing for the color imaging unit and the transfer unit: contact

Panasonic for packing.

Improper repacking of the printer may result in a service charge to remove spilled toner.

Since the printer uses dry toner, extreme care must be taken when handling. The printer

should be handled in the upright (vertical) position.

Material required:

Original cartons and packing materials

Newspaper or drop cloth

Shipping tape and scissors

Repacking

Содержание KX-P8415































































Результаты поиска

Содержание KX-P8415

Отзывы:

Похожие инструкции для KX-P8415

Бренды по названию

Популярные бренды

Panasonic KX-P8415, Руководство по обслуживанию

Результаты поиска

Содержание KX-P8415

Отзывы:

Похожие инструкции для KX-P8415

Бренды по названию

Популярные бренды