150
Options
2
Hold the PS SIMM with the connector edge pointing toward the connector
(CN9 or CN10) and position the notch as shown.
Insert the PS SIMM all the way into the connector at a 30
o
angle, and rotate
it to the left until it snaps into place.
3
Make sure both metal clips on the connector are fastened, and the two pins
on each of the connector are pushed through the holes on the PS SIMM.
4
Continue with
“To close the printer cover:” on page 140
.
5
Install a Windows PostScript printer driver as described by Chapter 3.
See
page 55
for Windows 95/Windows 98 or see
page 61
for Windows NT
4.0.
Notch
Metal clip