143
Options
The following section explains how to install a 32 or 64 MB DRAM SIMM on the KX-P7500 Series.
To install the SIMM you will need to do the following:
•
Remove the printer cover from the right of the printer. See
page 136
.
•
Install a SIMM in the empty SIMM slot on the printer controller board or replace a SIMM.
•
Replace the printer cover. See
page 140
.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
page 136
), touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
N
OTE
•
The SDRAM does not be supported.
C
AUTION
•
Do not drop or bend the SIMM.
•
Do not touch the connector edge of the SIMM.
•
Protect the SIMM from static electricity by keeping it in its antistatic package until you are ready to
install it.
•
Avoid exposing the SIMM to direct sunlight, high temperatures, or humidity.
Installing additional printer memory