8
General
Warning
B
To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
Caution
B
Do not open covers and do not attempt to repair the unit yourself. Refer servicing to qualified
personnel.
Power Source
Warning
B
The power source voltage of this unit is listed on the nameplate. Only plug the unit into an outlet
with the proper voltage.
B
When you operate this equipment, the outlet should be near the equipment and accessible.
B
To ensure safe operation the AC cord supplied must be inserted into standard three-prong AC
outlet which is effectively grounded (earthed) through the normal wiring.
B
The fact that the equipment operates satisfactorily does not imply that the power point is grounded
(earthed) and that the installation is completely safe. For your safety, if in any doubt about the
effective grounding (earthing) of the power point, consult a qualified electrician.
B
If the plug cannot be inserted into the AC outlet, contact a licensed electrician to replace the outlet
with a properly grounded (earthed) one. Do not defeat the purpose of the grounding (earthing) plug
(ex. do not use a conversion plug).
Caution
B
This printer utilizes a laser.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Laser Safety
Ozone Release
Warning
B
Make sure that the printer is installed in a well ventilated room so as not to increase density of
ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be
ventilated.
For Your Safety
