Administrator Options
Network—IP Address
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the
Options
screen, you can only view these parameters. For details about editing these parameters, see "IP Address
Settings (Page 167)".
Parameter Name
Description
Value Range
Default Setting
DHCP
Specify whether DHCP is used.
Enable, Disable
Enable
VoIP IP Address
Enter the VoIP IP address when DHCP is
disabled.
Valid IP Address
–
Application IP
Address
Enter the application IP address when DHCP
is disabled.
Valid IP Address
–
Subnet Mask
Enter the subnet mask when DHCP is
disabled.
128.0.0.0–
255.255.255.254
–
Default Gateway
Enter the default gateway address when
DHCP is disabled.
Valid IP Address
–
PBX IP Address 1
Enter the PBX IP Address 1.
Valid IP Address
–
PBX IP Address 2
Enter the PBX IP Address 2.
Valid IP Address
–
PBX Change Time
Enter the length of the time before the failover
process starts.
30–300 seconds
60 seconds
Network—IP Port
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the
Options
screen, you can only view these parameters. For details about editing these parameters, see "IP Port Settings
(Page 168)".
Parameter Name
Description
Value Range
Default Setting
PTAP Server
(IP Port 1)
Enter the IP port number for the PTAP server.
1024–65535
9300
PTAP Client
(IP Port 1)
Enter the IP port number for the PTAP client.
1024–65535
9301
PTAP Server
(IP Port 2)
Enter the IP port number for the PTAP server.
1024–65535
9300
PTAP Client
(IP Port 2)
Enter the IP port number for the PTAP client.
1024–65535
9301
Network—QoS
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the
Options
screen, you can only view these parameters. For details about editing these parameters, see "Quality of Service
(QoS) Settings (Page 169)".
Operating Instructions
185
Appendix