Panasonic KX-NS300, Руководство по установке

Страница: 159 / 300

1.
Connect a PC to a KX-TDA100/KX-TDA200 or KX-TE series PBX, and then start the Maintenance Console.
For details about connecting a PC to a PBX or for details about the Maintenance Console, refer to the
appropriate documentation.
2.
In the Maintenance Console, save the PBX's system data file DSYS or xxxxxxx.kea
*1
to the PC.
*2
For details about saving the system data file to the PC, refer to the appropriate documentation.
3.
Start Web Maintenance Console for the KX-NS300 in Off-line mode.
4.
In the Programme Launcher, click Database Converter.
5.
In Select Original File Name, select the system file (DSYS or xxxxxxx.kea
*1
) you saved in step 2 as the file
to convert.
6.
Select WebMC Language and click "Next".
7.
An image of converting the file to the KX-NS300 is displayed on the screen. The system data will be
converted and a system data file for the KX-NS300 (DFSYS) is created. It will complete within one minute.
8.
After conversion is complete, you can click Save on the Result of Converting screen and save the results
file to your PC.
9.
In the "Select Next Step" screen, you can select the action from the followings.
1.
"Finish of Database Conversion"
2.
"Continue Online Programming (Connect - Online Mode)
3.
"Continue Offline Programming (Open - Offline Mode)
*1
The PBX's system data file
•
KX-TDA100/KX-TDA200: DSYS
•
KX-TEx824: xxxxxx.kea
*2
The software version for KX-TDA100/KX-TDA200 and KX-TEx824 series PBXs must meet the latest version requirements shown in
the Data Converter tool. If the requirements are not met, you must use the Maintenance Console to upgrade the version to the latest
version, and then save the DSYS or xxxx.kea file.
Notice
•
The following numbering plan settings are brought over during data conversion:
Feature Numbers, Other PBX Number, Extension Number, Quick Dial Number
•
PBX voice data (e.g., ESVM, SVM, OGM) is not converted.
•
Data conversion for a SLC/LCOT card in the KX-NS300 is not supported; the number of ports in these
cards is too small.
•
In the case of KX-TDA100/KX-TDA200, data that is not supported by the data conversion is shown in
the following table.
Unsupported Item Default Setting
Time Mode
Current time mode Location setting default
Time mode switching time (manual mode) Not Stored
Wired/Wireless extensions
Timed Reminder Not set
Station Lock Unlocked
Remote Station Lock Unlocked
Extension Call Charge Total Total cleared
Not Ready/Ready (Wrap-up) Wrap-up status cleared
LCS On/Off Location setting default
Installation Manual 159
5.3 Starting Web Maintenance Console