background image

4.4  Virtual Cards

Function

Virtual Cards are programs included with the mother board and that are treated as virtual cards by Web
Maintenance Console for convenience. Those programs can be activated with the appropriate activation key
(apart from V-IPCS4 cards, which do not require activation keys). By installing Virtual Cards in the Virtual Slots
of the mother board using Web Maintenance Console, IP trunks, IP extensions, and IP-CSs can be used via
the mother board.

Virtual Card

Description

Virtual 4-Channel SIP Trunk Card 
(V-SIPGW4)

Virtual Card for 4-channel SIP trunk. Compliant with RFC 3261,
3262, 3264, 3311, 3581, 3960 and 4028 protocols, and ITU-T
G.729A and G.711 codec methods. Also supports T.38
protocol.

Virtual 4-Channel VoIP Gateway Card 
(V-IPGW4)

Virtual Card for 4-channel H.323 trunk. Compliant with VoIP
H.323 V.5 protocol, and ITU-T G.729A and G.711 codec
methods. Also supports T.38 protocol.

Virtual 8-Channel VoIP Extension
Card (V-IPEXT8)

Virtual Card for 8 IP-PTs (KX-NT300 series, KX-NT500 series,
and KX-NT265 [software version 2.00 or later only]). Compliant
with Panasonic proprietary protocol, and ITU-T G.729A, G.
711 and G.722 codec methods.

Virtual 8-Channel SIP Extension Card 
(V-SIPEXT8)

Virtual Card for 8 third party SIP phones. Compliant with RFC
3261, 3264, 3310, 2327 and 4028 protocols, and ITU-T G.
729A, G.711 and G.722 codec methods. Also supports T.38
Protocol.

Virtual 4 IP Cell Station Interface Card 
(V-IPCS4)

Virtual Card for 4 IP-CSs. Compliant with ITU-T G.729A and
G.711 codec methods.

Virtual UT Extension Card (V-UTEXT8)

Virtual Card for 8 KX-UT series SIP phones. Compliant with
RFC 2327, 3261, 3264, 3310, 3515, 4028 and 4235 protocols,
and ITU-T G.729A, G.711 and G.722 codec methods. Also
supports WSD, CWMP and HTTP.

116

Installation Manual

4.4 Virtual Cards

Содержание KX-NS300













































































































































































































































































































Отзывы:

Похожие инструкции для KX-NS300