Panasonic KX-NCS1101, Руководство по эксплуатации

Страница: 45 / 68

The following information appears.
Type:
•
Loop CO (Administrator only)
Used to access an idle trunk for making calls. Incoming calls from any trunk arrive at this button.
No additional parameter is required.
•
Single CO (Administrator only)
Used to access a specified trunk for making or receiving calls. Select the outside line number from
Param .
•
Group CO (Administrator only)
Used to access an idle trunk in a specified trunk group for making calls. Select the outside line
group number from
Param .
•
DSS/BLF (Direct Station Selection)
Used to access an extension with one touch. Enter the desired extension number (max. 4 digits
for KX-TDA50/KX-TDA100/KX-TDA200 or max. 5 digits for KX-TDA600) in the
Ext. No./Floating
Ext No. field.
•
One-touch (One-touch Dialing)
Used to access a preprogrammed party or feature with one touch. Enter the desired one-touch
dialing number in the Dial (Max. 32 digits) field.
•
Call Park
Used to park or retrieve a call in the preset PBX parking zone. Select Automatic or Specific from
Param . When Specific is assigned, select the desired parking zone number from Option .
•
Log-in/Log-out
Used to switch between log-in and log-out mode. Select All or Incoming Group from the
Param . When Incoming Group is selected, enter the desired floating extension number of the
incoming call distribution group (max. 4 digits for KX-TDA50/KX-TDA100/KX-TDA200 or max. 5
digits for KX-TDA600) in the
Ext. No./Floating Ext No. field.
Document Version 2007/2/19 Operating Manual—Server 45
3.2.7 Extension Names/Number